SMITH HR-3-1/2-BC Cam Follower and Track Roller - Stud Type

Holder Symbol:No; d:70; Inner/Outer Ring Material:[Steel] Steel; Internal Symbol:No; Transmitter Material:Steel; Width(mm):20; D:110; Type:Ball; Number of Raceway Ring Rows:Single Row; Basic Dynamic Load Rating Cr(N):38000;

Unit Body Material:Cast Iron; Surface Treatment:No; Rolling Element Material:Steel; Bearing Unit, Type:Pillow Type; Basic Dynamic Load Rating Cr(N):43500; Cover Type:Cast iron cover with; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Bearing Inner Dia. Shape:Cylindrical Bore Set; Pillow Type

Stroke:No; Days to Ship:8 Days; Bearing Unit, Type:Square flange shape; Rolling Element Material:Bearing Steel; d:60; Machining:Oil-free type; Surface Treatment:No; Seal:Silicone; Surface Treatment:No; Fit:J7;

T min.:-20 °C; N1:19 mm; N:13mm; L:127 mm; C:12.8 kN; Weight:0.92 kg; s1:30.5 mm; d1:32.4 mm; J:95 mm; B1:43.5 mm;

Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Bearing Material:Steel; Days to Ship:8 Days; Seals:DD (Contact Rubber S; T(mm):25 ～ 50; Shape:Block; Lateral Width L(mm):64; Shape:Block;

C:43.55 kN; T min.:-40 °C; J:130 mm; Designation of housing:FE211N-; Designation of bearing:US211-35G2T04; Weight:3.66 kg; N:18mm; d:55.56 mm; Designation of open end cover:SCOU211-35; T max.:100 °C;

Recommended tightening torque for set screw:5.5 Nm; Designation of housing:C205-; A3:1.5 mm; S:14.3 mm; A:22 mm; A5:19.7 mm; Weight:0.61 kg; H:80 mm; SW:3 mm; G:M6x1;

Designation of bearing:EX212-36G2L3; H1:130 mm; S:30.9 mm; s1:53.2 mm; d:57.15 mm; Recommended tightening torque for set screw:16.8 Nm; T max.:100 °C; L:194 mm; N1:32 mm; L1:119 mm;

H2:28.00 mm; UPC Code:999999999; Seal Type:Double Lip; H1:70.0 mm; Jmax:215 mm; Shaft Diameter db:65 mm; J:210.00 mm; N:18 mm; N1:24.00 mm; L:255 mm;

Outer Ring Shape:Flat; Size Standards:Metric System; Size Standards:Metric System; Inner/Outer Ring Material:Steel; Bearing Style:Open Type; Retainer Type:Momi removing; Load Direction:Radial; Holder Symbol:L1; D:225; Type:Angular Contact Ball;

Type:Bearings with Housin; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Housing Material:[Aluminum Alloy] Alu; Lateral Width L(mm):60; Bearing Material:Stainless Steel; Height H(mm):20 ～ 40; Height Indication:Height Selection; Bearing Part Number:6001; Width T(mm):15;

L:70 mm; Weight:0.38 kg; S:6 mm; Designation of bearing:US202-10G2; C:9.55 kN; H2:57 mm; B:22 mm; L1:20 mm; Designation of housing:PA203N-; E:9 mm;

Volume Discount:Available; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Flange O.D. H(φ):56; Shape:Flanged Pilot Type; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Flange Shape:Square Type; Width T(mm):45; Bearing I.D. d(mm):10;

C0r:118 kN; Brand:NTN; F:55 mm; da min:53 mm; k:3 mm; ras max:0.6 mm; Min operating temperature, Tmin:-20 °C; Inner ring reference:1R50X55X35; Dw:3.5 mm; Characteristic rolling element frequency, BSF:16.65 Hz;

Bearing UPC:013992025326; Bearing - Housing - Seal UPC:013992087379; Series Type:Light Series; Tensioning Unit Type:Push Type; Bearing Type:Split Cylindrical Re; Dimension P:0.6 in; Support Type:Take-Up; Dimension U:0.2 in; Cr - Dynamic Load Rating:14613 lbf; Dimension H:1.1 in;