
- GARLOCK BEARINGS LTD
- Angular Contact Ball Bearings Cam Follower and Track Roller - Stud Type Cam Follower and Track Roller - Yoke Type
Home>Products>Cam Follower and Track Roller - Yoke Type>INA LR5204-X-2Z-TVH Cam Follower and Track Roller - Yoke Type

INA LR5204-X-2Z-TVH Cam Follower and Track Roller - Yoke Type
Can't find what you're looking 0.7500 in d for -20 to +250 &de operating temperature range: INA LR5204-X-2Z-TVH Cam Follower and Track Roller - Yoke Type ? Our expert Cam Follower and Track Roller - Yoke Type Representatives be in contact with you GARLOCK BEARINGS LTD shortly!
- INA
LR5204-X-2Z-TVH
- -20 to +250 &de
- ANSI/ABMA Stand
- 0.7500 in
- Sealed
- None
- 1.5000 in
- Chrome Steel
- 3700 RPM
-
GARLOCK BEARINGS LTD2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Systems INA LR5204-X-2Z-TVH Cam Follower and Track Roller - Yoke Type
operating temperature range:: | -20 to +250 &de | standards met:: | ANSI/ABMA Stand | d: | 0.7500 in |
closure type:: | Sealed | lubrication hole location:: | None | roller width:: | 1.5000 in |
roller material:: | Chrome Steel | maximum rpm:: | 3700 RPM | axial static load capacity:: | 22800 lbf |
axial dynamic load capacity:: | 16800 lbf |
Technology INA LR5204-X-2Z-TVH Cam Follower and Track Roller - Yoke Type
INA LR5204-X-2Z-TVH bearing Size Chart (mm/inches) | |
---|---|
Bearing number | 7004 ACE/P4AL1 |
Dimensione (mm) | 42x20x12 |
Marchio | SKF |
Diametro del foro (mm) | 42 |
Diametro esterno (mm) | 20 |
Larghezza (mm) | 12 |
d | 20 mm |
D | 42 mm |
B | 12 mm |
d1 | 26.6 mm |
d2 | 24.8 mm |
D1 | 34.21 mm |
b | 1.4 mm |
C1 | 3.2 mm |
C2 | 1.45 mm |
C3 | 1.9 mm |
r1,2 - min. | 0.6 mm |
r3,4 - min. | 0.3 mm |
a | 13.2 mm |
da - min. | 22 mm |
db - min. | 22 mm |
Da - max. | 40 mm |
Db - max. | 39.6 mm |
ra - max. | 0.6 mm |
rb - max. | 0.3 mm |
dn | 28.1 mm |
Carico dinamico di base - C | 7.2 kN |
Carico statico nominale di base - C0 | 3.2 kN |
Limite di carico di fatica - Pu | 0.137 kN |
Velocità limite per la lubrificazione a grasso | 48000 r/min |
Velocità limite per la lubrificazione ad olio | 75000 mm/min |
Palla - Dw | 6.35 mm |
Ball - z | 12 |
Gref | 1.1 cm3 |
Fattore di calcolo - e | 0.68 |
Fattore di calcolo - Y2 | 0.87 |
Fattore di calcolo - Y0 | 0.38 |
Fattore di calcolo - X2 | 0.41 |
Fattore di calcolo - Y1 | 0.92 |
Fattore di calcolo - Y2 | 1.41 |
Fattore di calcolo - Y0 | 0.76 |
Fattore di calcolo - X2 | 0.67 |
Classe di precarico A - GA | 64 N |
Classe di precarico B - GB | 193 N |
Classe di precarico C - GC | 390 N |
Fattore di calcolo - f | 1.04 |
Fattore di calcolo - f1 | 0.99 |
Fattore di calcolo - f2A | 1 |
Fattore di calcolo - f2B | 1.03 |
Fattore di calcolo - f2C | 1.06 |
Fattore di calcolo - fHC | 1 |
Classe di precarico A | 52 N/micron |
Classe di precarico B | 78 N/micron |
Classe di precarico C | 102 N/micron |
d1 | 26.6 mm |
d2 | 24.8 mm |
D1 | 34.21 mm |
C1 | 3.2 mm |
C2 | 1.45 mm |
C3 | 1.9 mm |
r1,2 min. | 0.6 mm |
r3,4 min. | 0.3 mm |
da min. | 22 mm |
db min. | 22 mm |
Da max. | 40 mm |
Db max. | 39.6 mm |
ra max. | 0.6 mm |
rb max. | 0.3 mm |
dn | 28.1 mm |
Carico dinamico di base C | 7.15 kN |
Carico statico nominale di base C0 | 3.25 kN |
Limite di carico di fatica Pu | 0.137 kN |
Velocità raggiungibile per la lubrificazione a grasso | 48000 r/min |
Velocità raggiungibile per la lubrificazione olio-aria | 75000 r/min |
Diametro della sfera Dw | 6.35 mm |
Numero di palline z | 12 |
Quantità di grasso di riferimento Gref | 1.1 cm³ |
Classe di precarico A GA | 64 N |
Rigidità assiale statica, classe di precarico A | 52 N/µm |
Classe di precarico B GB | 193 N |
Rigidità assiale statica, classe di precarico B | 78 N/µm |
Classe di precarico C GC | 390 N |
Rigidità assiale statica, classe di precarico C | 102 N/µm |
Fattore di calcolo f | 1.04 |
Fattore di calcolo f1 | 0.99 |
Fattore di calcolo f2A | 1 |
Fattore di calcolo f2B | 1.03 |
Fattore di calcolo f2C | 1.06 |
Fattore di calcolo fHC | 1 |
Fattore di calcolo e | 0.68 |
Fattore di calcolo (single, tandem) Y2 | 0.87 |
Fattore di calcolo (single, tandem) Y0 | 0.38 |
Fattore di calcolo (single, tandem) X2 | 0.41 |
Fattore di calcolo (schiena contro schiena, faccia a faccia) Y1 | 0.92 |
Fattore di calcolo (schiena contro schiena, faccia a faccia) Y2 | 1.41 |
Fattore di calcolo (schiena contro schiena, faccia a faccia) Y0 | 0.76 |
Fattore di calcolo (schiena contro schiena, faccia a faccia) X2 | 0.67 |
Cuscinetto di massa | 0.064 kg |
INA LR5204-X-2Z-TVH Cam Follower and Track Roller - Yoke Type Cad Models
Contact Us

- GARLOCK BEARINGS LTD
- Address0908 North Main Street, East Peoria, Illinois 32587, U.S.A.
- Phone(Working Time)+1-329-699-8645
- Fax
Related News
Can I just replace the wheel bearing and not the Hub? |
How do you get rust off fidget spinner bearings? |
How long do front wheel bearings last? |
Product Categories
- Angular Contact Ball Bearings
- Cam Follower and Track Roller - Stud Type
- Cam Follower and Track Roller - Yoke Type
- Cartridge Unit Bearings
- Cylindrical Roller Bearings
- Flange Block Bearings
- Hanger Unit Bearings
- Insert Bearings Cylindrical OD
- Insert Bearings Spherical OD
- Mounted Units & Inserts
- Needle Non Thrust Roller Bearings
- Pillow Block Bearings
- Precision Ball Bearings
- Self Aligning Ball Bearings
- Single Row Ball Bearings
- Sleeve Bearings
- Timken 782 Bearing
- Timken 3820 Bearing
- Timken 594 Bearing
- 6204 2rsr C3 Bearing
New Products
CONSOLIDATED BEARING LR-50/8-2RS Cam Follower and Track Roller - Yoke Type
CONSOLIDATED BEARING LR-50/7-2RS Cam Follower and Track Roller - Yoke Type
CONSOLIDATED BEARING LR-50/6-2RS Cam Follower and Track Roller - Yoke Type
CONSOLIDATED BEARING LR-50/5-2RS Cam Follower and Track Roller - Yoke Type
CONSOLIDATED BEARING LFR-5201/12-ZZ Cam Follower and Track Roller - Yoke Type